Trike Parts and Accessories By Brand

Note: In addition to the above Easy Load Ramp System.One longer RHI and one taller Ramp Support “T”. The ELRS-PU allows any of the three systems to be used as designed with the trucks tail gate open or in the horizontal position.

Everything about the ELRS-XLW is the same as the description above for the ELRS-XL except the Ramps. These ramps are ~5” wide and designed for Fat Tire Trikes. They are also an excellent choice for loading hand cycles. The 5” width of the ramp is an easier “target” for a person to load a hand cycle from a wheel chair. The 5” width prevents the spokes on a camber wheeled hand cycle from rubbing on the Ramp sidewalls. Three Ramps are also available in the ELRS-XLW. ...

The ELRS is our basic ramp system this system consists of 2 Ramps, 1 Ramp Support “T” (“T”) and 1 Receiver Hitch Insert (RHI). The ramps are 5’ in length with side walls ~2” in height and they are ~3” wide. There is a 2’ Ramp Extension which nests outside the Ramp and flips over onto the floor of the vehicle to which the trike will be loaded. The Ramp has a U channel latch which fits over the horizontal bar of the “T”. The “T” fits into the RHI which is inserted into the vehicles 2” receiver...

The Easy Load Ramp System (Three Ramps) is manufactured on an as requested basis. It is designed for the customer with lifting issues allowing the heavy end (normally the back wheel) of an electric assist or battery powered trike to be pushed up the ramps first. Three standard 5’ ramps with an RHI and a Ramp Support “T”.

Everything about the ELRS-XL is the same as the description above for the ELRS except the Ramps. These Ramps are only 4’6” in length when stowed but they telescope to a maximum of 8’. There are additional stops built in at 5’, 6’ and 7’ which are convenient for uneven terrain or driveways. The ELRS-XL is ideal for use with vehicles which are higher off the ground such as larger vans, SUV’s and pick-up trucks. Three Ramps are also available in the ELRS-XL. ...

Easy Load’s newest product is telescoping ramps, or the Easy Load Ramp System-XL and XLW. These telescoping ramps have succeeding stops at six, seven and eight feet. Three telescoping (5’-8’) ramps with an RHI and a Ramp Support “T”.

This single upright bicycle rack is designed to be mounted on either the ELT or the ELT-XL Easy Load Tray RackThe Bike Rack carries one upright bike and is attached to the Receiver Hitch Insert of either the ELT or the ELT-XL. The attach point is clearly marked on the RHI with a sticker in white letters. The bike rack shown is our proof of concept model. As such it is not painted but it does show concept and attach point. The Bike Rack is tall enough to allow a 20” front wheel of a recumbent...

Three telescoping (5’-8’) ramps with an RHI and a Ramp Support “T”.

The Easy Load Ramp Support Stand is an adjunct product for the Easy Load Ramp Systems. It was designed for those folks whose trike transporting vehicle does not have a receiver hitch or for those not wanting to incur the expense of buying and installing a hitch but wanting to use the unique ELRS. The top horizontal bar of the Stand acts as the Receiver Hitch Insert of the basic ELRS.Durable and compact the Stand when folded flat is 2” high and stores easily with the Ramps. The 17” arm is...

This is our basic tray system and holds one tadpole type trike, D trike or hand cycle. The trike transporting vehicles 2” receiver hitch must have a ground clearance or 16”. If not, a riser is required to make it so. If a riser is required then it must also have a second Hitch Tite to secure it from moving.The ELT comes with running and brake lights as well as turn signals. Power to the lights is supplied through either a flat four pin or a round seven blade connector. Easy Load will install...

The Efneo GTRO Gearbox is a 3 Speed Internally Geared Crankset Replacement. It will give you an effective gear range identical to having a 28/40/50 Triple Crankset up front, without having to use a front derailleur. You can shift the Efneo whether you are moving or standing still! The Efneo GTRO Gearbox comes in 3 different configurations- Twist Shifter, Trigger Shifter, or Bar End Shifter. For more information visit www.efneo.com ...

A pair of QR levers to relpace the two M6 bolts for clamping the boom allow quick adjustment of the boom length (note that the chain length may need alterning if the boom is moved to a new setting).

For 20 and 26 inch suspension racks. Allows fitting of top bags to be fitted to a rack.

Schwinn Meridian Front Brake Cable Housing 650mm Wire 1000mm

Front Wheel for Schwinn Meridian Trike

Head Set for Schwinn Meridian Trike

Sealed Bearing for Rear Axle on Schwinn Meridian

Extra long brake cable with housing to fit Schwinn Meridian

This pedal set is perfect for the rider that wants to totally secure their feet to a pedal. It features a complete foot platform with a solid heel support. It also features 2 oversized velcro straps with reflective strip and stainless steel ringlets that allow for a strong yet comfortable fit. A counterbalance on the bottom also assures the pedal will always remain upright.

Elastic cord around back of shoe holds foot forward Elastic cord is adjustable for diferent shoe sizes Red finge pull tab to aid geting your cord behind shoe Made out of aluminum Pair, reft and right pedals with heal retensions

Elastic cord around back of shoe holds foot forward Elastic cord is adjustable for diferent shoe sizes Red finge pull tab to aid geting your cord behind shoe Made out of aluminum Pair, left side heal retension

Custom pedal adaptor set Allows foot to be fastened to any pedal front and rear Great for lost mobility or handicap applications Allows for up to size 13 shoe Does not come with pedals

The highest quality mirror on the market today

Rear Mudguard for HP Velotechnik Trikes and Bikes

Hp Velotechnik Seat Angle Adapter Set GEN/GEL/GEF Adapter to adjust the backrest in 9 Degree more upright position with quick release.

Flag Hp Velotechnik

Fits Hp Velotechnik trikes with mesh seat

Hp Velotechnik Neck / Head Rest for Body Link seat

Waterbottles, Cages, and attachment brackets. Atached to back of seat

Rack for Hp Vellotechnik Scorpion FS 26 and Scorpion FS Enduro

Mudguard Set specificaly designed for HP Velotechnil trikesMudguards are for trikes built after 03/2012

Walking Aid Mount For Holding Cane

HpVelotechnik Quick Chain Adjuster for managing chain length

Stand up Aid For Scorpion and Gekko Trikes

Hp Velptechnik Hand Rest Left

Polycarbonite Wind Fairing

Air Flow Seat Pad

Hp Velotechnik Computer Head Mount.  Also works for mounting front light inder boom.

For Mounting Computer Sensor

Hp Velotechnik Chain Wheel Guard for triple chain ring crank

Add a second battery to your Go Swiss motor kitBikeBus and CanBus systems are not compatable with each other. Go Swiss BikeBus are systems before 07/2018Go Swiss CanBus are systems after 08/2018

Hp Velotechnik Seat Wings For Body Link Seat

Upgrade your Scorpion to the Rockshox Monarch RL air adjustable shox which has adjustable rebound