RACK PARTS & ACCESSORIES

 Replaces stock Streamliner foot to adapt any Streamliner rack to fit onto standard 10mm nutted wheel axles. Ideal for fixies, cruisers, urban bikes and traditional bikes without eyelets Axle mount Black Streamliner racks

 Genuine Delta parts MR 150D Fits Mega Ultra + Mega Universal only Single

 Replacement deck for Portland Design Works rear racks

 Replacement hardware for Portland Design Works rear racks Rep Hardware

 Clampit can be mounted within seconds to any racktime carrier except the Clipit - no tools required while still being able use the Snapit adapter Turns compatible racks into spring equipped racks for holding down small or soft cargo 10 mm tube diameter, 100 mm platform inner width Silver f/Standit/Addit/Foldit/Topit racks

 Clampit can be mounted within seconds to any racktime carrier except the Clipit - no tools required while still being able use the Snapit adapter Turns compatible racks into spring equipped racks for holding down small or soft cargo 10 mm tube diameter, 100 mm platform inner width Black f/Standit/Addit/Foldit/Topit racks

 Clampit can be mounted within seconds to any racktime carrier except the Clipit - no tools required while still being able use the Snapit adapter Turns compatible racks into spring equipped racks for holding down small or soft cargo 12 mm tube diameter, 100 mm platform inner width Black f/Shine Evo STD & Tour racks

 Clampit can be mounted within seconds to any racktime carrier except the Clipit - no tools required while still being able use the Snapit adapter Turns compatible racks into spring equipped racks for holding down small or soft cargo 10 mm tube diameter, 100 mm platform inner width Silver f/Standit/Addit/Foldit/Topit racks

 Clampit can be mounted within seconds to any racktime carrier except the Clipit - no tools required while still being able use the Snapit adapter Turns compatible racks into spring equipped racks for holding down small or soft cargo 10 mm tube diameter, 100 mm platform inner width Black f/Standit/Addit/Foldit/Topit racks

 Clampit can be mounted within seconds to any racktime carrier except the Clipit - no tools required while still being able use the Snapit adapter Turns compatible racks into spring equipped racks for holding down small or soft cargo 12 mm tube diameter, 100 mm platform inner width Silver f/Shine Evo STD & Tour racks

 Clampit can be mounted within seconds to any racktime carrier except the Clipit - no tools required while still being able use the Snapit adapter Turns compatible racks into spring equipped racks for holding down small or soft cargo 12 mm tube diameter, 100 mm platform inner width Black f/Shine Evo STD & Tour racks

 Clampit can be mounted within seconds to any racktime carrier except the Clipit - no tools required while still being able use the Snapit adapter Turns compatible racks into spring equipped racks for holding down small or soft cargo 12 mm tube diameter, 100 mm platform inner width Silver f/Shine Evo STD & Tour racks

 Clampit can be mounted within seconds to any racktime carrier except the Clipit - no tools required while still being able use the Snapit adapter Turns compatible racks into spring equipped racks for holding down small or soft cargo 10 mm tube diameter, 100 mm platform inner width Black f/Shine/Standit/Addit/Foldit/Topit racks

 Clampit can be mounted within seconds to any racktime carrier except the Clipit - no tools required while still being able use the Snapit adapter Turns compatible racks into spring equipped racks for holding down small or soft cargo 10 mm tube diameter, 100 mm platform inner width Silver f/Shine/Standit/Addit/Foldit/Topit racks

 Clampit can be mounted within seconds - no tools required while still being able use the Snapit adapter Turns compatible racks into spring equipped racks for holding down small or soft cargo 15mm tube diameter, 100mm platform inner width Black f/Cannondale

 Quick mounting, no tools required - Fillit holds mini air pumps with a diameter between 22 and 25 mm Compatible with any racktime carrier Pump mount Black Racktime Carriers

 Heavy duty SnapIt mounting adapter plate for attaching to existing baskets, rack bags, or just about anything else to use with SnapIt equipped racks Mounting bore spacing: 194 x 83/109.2 mm / 7.6 x 3.3/4.3 in Maximum load 55lbs Caution: not compatible with child seats, Secureit and Lightit models Heavy Duty SnapIt  Black

 Replacement/optional stays for Racktime rear carriers Available in straight and offset designs Offset Black 180mm 35mm/1.4` Offset

 Replacement/optional stays for Racktime rear carriers Available in straight and offset designs Offset Black 220mm 5mm/0.2` Offset

 Replacement/optional stays for Racktime rear carriers Available in straight and offset designs Offset Black 190mm 35mm/1.4` Offset

 Replacement/optional stays for Racktime rear carriers Available in straight and offset designs Straight Black 190mm

 Replacement/optional stays for Racktime rear carriers Available in straight and offset designs Straight Black 240mm

 Replacement/optional stays for Racktime rear carriers Available in straight and offset designs Straight Black 350mm

 Replacement/optional stays for Racktime rear carriers Available in straight and offset designs Straight Silver 240mm

 Replacement/optional stays for Racktime rear carriers Available in straight and offset designs Straight Silver 350mm

 Secureit locks your Snapit adapter, making lives harder for would be theives Secures Snapit accessories such as baskets and/or bags Black SnapIt Accessories

 SnapIt mounting adapter plate for attaching to existing baskets or rack bags to use with SnapIt equipped racks Includes mounting hardware Mounting bore spacing: 195 x 100 mm / 7.6 x 3.9 in Maximum load 26lbs SnapIt Black

 Bike rack RR 290 mm strut kit with hardware Great for smaller frames 4 bolts & nuts 1 set/bag 290 mm

 Hardware included Fits all Sunlite Gold-Tec racks Cut to length Satin Steel 320mm

 Hardware included Fits all Sunlite Gold-Tec racks Cut to length Satin Steel 240mm

 Used for attaching rear racks onto mono stay bikes Rubber coated steel for all weather durability Original for 1-1/8 tubing

 Used for attaching rear racks onto mono stay bikes Rubber coated steel for all weather durability One-piece for 1-1/4 tubing

 Used for attaching rear racks onto mono stay bikes Rubber coated steel for all weather durability One-piece  for 1-1/8 tubing

 Skewer only 220mm

 Skewer only 250mm

 Fits 4506/45119

 Replacement/Additional rod holders for use with the Sunlite Ramblin Rod Holder Racks Adds an additional rod holder for a total of 2 per rack Not compatible with standard racks Add on Black Sunlite Ramblin Rod Racks

 Adapter set for QR equipped bikes without eyelets Allows attaching racks to the QR skewer instead of frame eyelets Only compatible with Classic series racks, will not work with Evo series QR Silver

 Clamp set for the lower portion of racks, required for bags that have classic bungee-hooks Creates an additional tab for bag attachment and securing Set of 2 clamps 10mm Black

 Clamp set for the lower portion of racks, required for bags that have classic bungee-hooks Creates an additional tab for bag attachment and securing Set of 2 clamps 14mm Black

 Mud guard bracket for rear racks Silver

 Extends rack to hard to reach eyelets or spaces it higher up and further out. Allows mounting on bikes with disc brakes Not compatable with any �EVO� Tubus racks - only compatible with �Classic� style racks Silver

 Tubus Lowrider rack adapter for use with rigid forks without eyelets Compatible with all rigid forks from 20 to 32mm in diameter Fits all Tubus Lowrider racks EXCEPT the Duo Rack Adapter Black/Silver Tubus Lowrider Does not fit the Duo rack

 Tubus Lowrider rack adapter for use with rigid forks without eyelets Compatible with all rigid forks from 25 to 40mm in diameter Fits all Tubus Lowrider racks EXCEPT the Duo Rack Adapter Black Tubus Lowrider Does not fit the Duo rack

 Bolt on eyelet for use with Tubus Lowrider racks and bags requiring bungee hook attachment  Available straight or with a 90 degree bend Straight Silver

 Bolt on eyelet for use with Tubus Lowrider racks and bags requiring bungee hook attachment  Available straight or with a 90 degree bend Bent Silver

 Extendable, adjustable height kickstand that attaches to Tubus Lowrider series of front racks to stablize the front wheel Fits on Tara, Ergo, Nova, Duo and older models Rack Mounted Black Tubus Lowrider Adjustable

 Rack mounting set includes stays, stay clamps and associated hardware Compatible with all Classic series racks as well as Racktime Addit and Standit racks Black 190mm

 Rack mounting set includes stays, stay clamps and associated hardware Compatible with all Classic series racks as well as Racktime Addit and Standit racks Silver 190mm

 Rack mounting set includes stays, stay clamps and associated hardware Compatible with all Classic series racks as well as Racktime Addit and Standit racks Black 240mm

 Rack mounting set includes stays, stay clamps and associated hardware Compatible with all Classic series racks as well as Racktime Addit and Standit racks Silver 240mm

 Rack mounting set includes stays, stay clamps and associated hardware Compatible with all Classic series racks as well as Racktime Addit and Standit racks Black 350mm

 Rack mounting set includes stays, stay clamps and associated hardware Compatible with all Classic series racks as well as Racktime Addit and Standit racks Silver 350mm

 Mounting set for Evo series racks, includes 240mm stays, clamps and associated hardware Black 240mm

 Seat stay mounting brackets for use with the Fly series racks Mounts at the sides of the seat stays rather than the mid bracket Black

 Replacement stay clamps for use with Tubus racks Mounts stays to rack Black

 Replacement stay clamps for use with Tubus racks Mounts stays to rack Silver