Trike Parts and Accessories By Brand
Call us: 1800-561-6670
Filter
Sort By
Assist Bars to help with getting on and off of trike.
Catrike Chain Tensioner allows you to adjust the boom length without resisting the chain.
Bracket for mounting computer sensor
Complete had rest assembly sold as pair left and right
Bar to mount mirror and computer or anything else you wish to clamp to this 7/8" diamater rount tube.
Velcro strap thst goes around handlebar and brake lever
Chain Ring to fit one piece crank, 36 Tooth, 1/2'' chain by 3/16'' wide.Must use 3/16'' chain
Coaster Brake With Double Sprocket For Tricycle
Note: In addition to the above Easy Load Ramp System.One longer RHI and one taller Ramp Support “T”. The ELRS-PU allows any of the three systems to be used as designed with the trucks tail gate open...
Note: In addition to the above Easy Load Ramp System.One longer RHI and one taller Ramp Support “T”. The ELRS-PU allows any of the three systems to be used as designed with the trucks tail gate open or in the horizontal position.
Everything about the ELRS-XLW is the same as the description above for the ELRS-XL except the Ramps. These ramps are ~5” wide and designed for Fat Tire Trikes. They are also an excellent choice for...
Everything about the ELRS-XLW is the same as the description above for the ELRS-XL except the Ramps. These ramps are ~5” wide and designed for Fat Tire Trikes. They are also an excellent choice for loading hand cycles. The 5” width of the ramp is an easier “target” for a person to load a hand cycle from a wheel chair. The 5” width prevents the spokes on a camber wheeled hand cycle from rubbing on the Ramp sidewalls. Three Ramps are also available in the ELRS-XLW. ...
The ELRS is our basic ramp system this system consists of 2 Ramps, 1 Ramp Support “T” (“T”) and 1 Receiver Hitch Insert (RHI). The ramps are 5’ in length with side walls ~2” in height and they are...
The ELRS is our basic ramp system this system consists of 2 Ramps, 1 Ramp Support “T” (“T”) and 1 Receiver Hitch Insert (RHI). The ramps are 5’ in length with side walls ~2” in height and they are ~3” wide. There is a 2’ Ramp Extension which nests outside the Ramp and flips over onto the floor of the vehicle to which the trike will be loaded. The Ramp has a U channel latch which fits over the horizontal bar of the “T”. The “T” fits into the RHI which is inserted into the vehicles 2” receiver...
Everything about the ELRS-XL is the same as the description above for the ELRS except the Ramps. These Ramps are only 4’6” in length when stowed but they telescope to a maximum of 8’. There are...
Everything about the ELRS-XL is the same as the description above for the ELRS except the Ramps. These Ramps are only 4’6” in length when stowed but they telescope to a maximum of 8’. There are additional stops built in at 5’, 6’ and 7’ which are convenient for uneven terrain or driveways. The ELRS-XL is ideal for use with vehicles which are higher off the ground such as larger vans, SUV’s and pick-up trucks. Three Ramps are also available in the ELRS-XL. ...
This single upright bicycle rack is designed to be mounted on either the ELT or the ELT-XL Easy Load Tray RackThe Bike Rack carries one upright bike and is attached to the Receiver Hitch Insert of...
This single upright bicycle rack is designed to be mounted on either the ELT or the ELT-XL Easy Load Tray RackThe Bike Rack carries one upright bike and is attached to the Receiver Hitch Insert of either the ELT or the ELT-XL. The attach point is clearly marked on the RHI with a sticker in white letters. The bike rack shown is our proof of concept model. As such it is not painted but it does show concept and attach point. The Bike Rack is tall enough to allow a 20” front wheel of a recumbent...
The Easy Load Ramp Support Stand is an adjunct product for the Easy Load Ramp Systems. It was designed for those folks whose trike transporting vehicle does not have a receiver hitch or for those...
The Easy Load Ramp Support Stand is an adjunct product for the Easy Load Ramp Systems. It was designed for those folks whose trike transporting vehicle does not have a receiver hitch or for those not wanting to incur the expense of buying and installing a hitch but wanting to use the unique ELRS. The top horizontal bar of the Stand acts as the Receiver Hitch Insert of the basic ELRS.Durable and compact the Stand when folded flat is 2” high and stores easily with the Ramps. The 17” arm is...
This is our basic tray system and holds one tadpole type trike, Delta trike or hand cycle. The trike transporting vehicles 2” receiver hitch must have a ground clearance or 16”. If not, a riser is...
This is our basic tray system and holds one tadpole type trike, Delta trike or hand cycle. The trike transporting vehicles 2” receiver hitch must have a ground clearance or 16”. If not, a riser is required to make it so. If a riser is required then it must also have a second Hitch Tite to secure it from moving. The ELT comes with running and brake lights as well as turn signals. Power to the lights is supplied through either a flat four pin or a round seven blade connector. Easy Load will...
The Efneo GTRO Gearbox is a 3 Speed Internally Geared Crankset Replacement. It will give you an effective gear range identical to having a 28/40/50 Triple Crankset up front, without having to use a...
The Efneo GTRO Gearbox is a 3 Speed Internally Geared Crankset Replacement. It will give you an effective gear range identical to having a 28/40/50 Triple Crankset up front, without having to use a front derailleur. You can shift the Efneo whether you are moving or standing still! The Efneo GTRO Gearbox comes in 3 different configurations- Twist Shifter, Trigger Shifter, or Bar End Shifter. For more information visit www.efneo.com ...
3-Watt Luxeon high output LED with new fish eye lens Twice the life of standard LEDs Super Tough CNC alloy body 3 Beam modes - strady, and flashing Comes with handle bar bracket Requires 4 AAA...
3-Watt Luxeon high output LED with new fish eye lens Twice the life of standard LEDs Super Tough CNC alloy body 3 Beam modes - strady, and flashing Comes with handle bar bracket Requires 4 AAA batteries
Greenspeed Accessory Post
Coupler to mount fork of second trike to rear of Greenspeed Anura
Turn your GreenSpeed Magnum into an E-Trike with our Boost Kit. Powered with Bosch’s Performance Line Mid-Drive Motor, PowerPack 400Wh Lithium Ion battery and Kiox console, you’ll enjoy the added...
Turn your GreenSpeed Magnum into an E-Trike with our Boost Kit. Powered with Bosch’s Performance Line Mid-Drive Motor, PowerPack 400Wh Lithium Ion battery and Kiox console, you’ll enjoy the added assist an e-trike can provide. The Boost Kit Includes: Bosch Performance Line Cruise Mid-Drive Motor Bosch PowerPack 400Wh Battery Bosch Kiox Display Crank Arms (No Pedals) Boom ...
Greenspeed Chain Gobblers made especially for the Magnum trikes are now available. These Chain Gobblers are a special device which automatically adjusts the chain length as the crank extension is...
Greenspeed Chain Gobblers made especially for the Magnum trikes are now available. These Chain Gobblers are a special device which automatically adjusts the chain length as the crank extension is moved in or out to adjust for different leg lengths. This is useful if there are people with different leg lengths who want to ride the same trike. They are particularly useful for dealers, as what used to take 10 minutes to adjust the chain length for different riders, can now be done in less than...
Greenspeed Grab Handle