 |
|
|
|
Greenspeed Headrest
The GS headrest is made to fit behind the nape of your neck, and just under the back of your helmet. Headrest frames are made from Cromoly, the locking wedges from aluminum and the pad is a closed cell foam. To seal the seat tube off from the elements, 'o'rings are included with your purchase. The headrest is adjustable up and down, fore and aft to give near-perfect support.. It is best set up just a little behind the ideal position so that your eyeballs don't pop out of their sockets on those gravel sections of your ride! Flag mounts are also fitted as you will have lost your original seat mounting
Available for 3/4" outer diameter seat tubes with either 0.035" or
0.049" wall thickness (AC-HR1), or for 5/8" with a 0.035" wall thickness
(AC-HR2)
Shipping Zone Map Industrialbicycles.com is completely dedicated to our customers; therefore, we prefer to talk to each customer individually to make sure you are completely knowledgeable about making the best purchase for your needs. If you have any questions on any product , please call any of our sales associate.
|
