Motor Kit Rear 20'' $564.00
Battery 9Ah included, Upgrade to 15ah +$60.00
Motor Kit Rear 24'' $564.00
Motor Kit Rear 26'' $564.00
Motor Kit Rear 700c $564.00
Trike Rack $59.95 |
Includes:
1 x Hand-Built Wheel w/ Disc Hub Motor
1 x 36/48V 20A Brushless Motor Controller
2 x Throttles (1 Thumb & 1 Split-Twist
2 x E-Brake Handles (left & right)
1 x Extension Wire – Motor
1 x Extension Wire - Throttle/E-Brakes
1 x Installation DVD & Owner's Manual
Accessories:
1 x 7-Speed Freewheel (rears only)
15 x Plastic Zip Ties
2 x C-Washers - Stainless Steel (fronts only)
1 x Wire harness w/ Andersons - SLA tabs
1 x Freewheel Removal Tool (rears only)
1 x 3mm Allen wrench for installing throttle
Every Industrialbicycles.com hub motor wheel is been
hand-built by a professional wheel builder with experience
building wheels with hub motors for electric bike conversions.
Every wheel is stress tested during the building process.
This ensures that your new Industrialbicycles.com wheel will be
true, round and perfect out of the box.
The Industrialbicycles.com Complete Conversion System offers
the best value and quality for converting your conventional
bicycle to an electric hybrid bike.
Motor Specifications:Motor:
Internally Geared or Direct-Drive Hub Motor(Both 6-bolt ISO disc
brake compatible)
Power: Geared = 350-450w peaks / Direct Drive = 500-1000w
peaks
Wheel: USA Hand-Built Wheel w/ Heavy Duty Double-Walled/Eyeletted
Rim & Steel Spokes
Hub Weight: Geared 7 Pounds / Direct-Drive 14 pounds
Warranted: 1 Year at 36v or 48v use (Not warranted for
use above 60v nominal)
Speed: Top Speed is between 20 and 28MPH.
*Contingent on battery and motor combination.
Range: Range is between 12-34 Miles (rider weight, rider
input and terrain contingent)
*Rider weight, rider input,terrain, battery/motor combination
contingent.
Charging Time: 4hrs - 8hrs (depending on battery and
charger type) |
|
Battery or Replacement:
36 Volt 9 Amp Hour Electric Bicycle Battery - SLA (Sealed
Lead Acid) - Includes 2 Amp Charger $199.99
36 Volt 15 Amp Hour Electric Bicycle Battery - SLA (Sealed
Lead Acid) - Includes 2 Amp Charger $259.99
|
Rechargeable Sealed Lead Acid Battery Pack in Convenient
Electric Bicycle Battery Bag
Every pack ships professionally soldered in a series
and is completely "Plug & Ride" with Anderson Powerpole
connectors.
Range: 12-34 Miles (greater ranges availale with
larger capcity battery packs)
Weight: Capacity (Amp Hours) = Range = Weight (See
battery dropdown above for specific weights & ranges)
Charging Time: 2Amp Charger = 2Amps per Hour
(Example: 9ah battery = 9/2 = 4.5 hours)
Cycle Life: 250+ (charge - discharge cycles before
nominal capacity falls below 80%)
Features:
- -Assembled in the USA
- -Professionally Soldered Wiring
- -Anderson Powerpole Connectors
- -Durable Handle
- -Reflective Strip for Safety
- -Extra Wide Velcro Straps for Securing to a Rear
Rack
Your hub motor wheel has been hand-built by a
professional wheel builder with experience building wheels
with hub motors for electric bike conversion kits.
The Industrialbicycles.com electric bike conversion
kit system will work with any 36v or 48v e-bike battery pack.
Please be aware that at 48 volts the system is capable of
speeds (30MPH top speed at 26”) that exceed Federal EBike
Laws and your bike may become classified as a “motor
vehicle”. At 36 volts the E-Bike Conversion Kit is within
the speed limitation guidelines (20MPH unassisted on flats
with 150 pound rider) established by the U.S. Federal
Electric Bike Law, and in most states, no license,
registration or insurance is required.
|
